Product ID:COATING COMPOUND, METAL PRETREATMENT, RESIN
MSDS Date:01/01/1987
FSC:8030
NIIN:00-082-2425
Kit Part:Y
MSDS Number: BRFKX

TRIANGLE COATINGS, INC.

1930 FAIRWAY DRIVE
SAN LEANDRO, CA 94577
US

Emergency Phone: 510-895-8000

Info Phone: 510 284-9031

Cage: 0GB20

TRIANGLE COATINGS INC

SAN LEANDRO, CA 94577-5631 US

Telephone: 800-895-8000

Cage: 0GB20

POLYVINYL BUTYRAL (SARA III) (VAPOR PRESSURE 0.0 MM HG @

CAS: 63148-65-2

RTECS: TR4955000

Fraction By Weight: <10%

BUTYL ALCOHOL (SARA III) (VAPOR PRESSURE 5.9 MM HG @ 20C)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: <25%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ETHYL ALCOHOL (VAPOR PRESSURE 53.9 MM HG @ 20C)

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: <65%

ACGIH TLV: 1000 PPM

CHROMIUM (SARA III) (VAPOR PRESSURE 0.0 MM HG @ 20C)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: <1%

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Health Hazards Acute and Chronic:ACUTE TOXICITY: OVEREXPOSURE CAN LEAD
TO CENTRAL NERVOUS SYSTEM DEPRESSION (HEADACHE, DIZZINESS, NAUSEA,
UNCONSCIOUSNESS). EYE: SLIGHT IRRITATION. TESTS SHOW OVEREXPOSURE
MAY CAUSE BLOOD DISORDERS AND NEUROLOGIC DISORDERS. INTENTIONAL
MISUSE OF THIS PRODUCT MAY BE HARMFUL OR FATAL.
Explanation of Carcinogenicity:THIS PRODUCT CONTAINS A SUSPECTED
(CHROMIUM) CARCINOGEN.
Effects of Overexposure:CHRONIC: EYE: PROLONGED & REPEATED CONTACT MAY
BE MORE THAN SLIGHTLY IRRITATING. SKIN: PROLONGED & REPEATED LIQ
CONTACT CAN CAUSE DEFATTING & DRYING WHICH MAY RESULT IN SKIN
IRRITATION & DERMATITIS. R EPORTS ASSOCIATE REPEATED & PROLONGED
OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRAIN &
NERVOUS SYSTEM DAMAGE
Medical Cond Aggravated by Exposure:NONE

First Aid:EYE: FLUSH W/WATER 15 MIN HOLD EYELIDS OPEN. GET MED AID.
SKIN: WASH W/SOAP & WATER. REMOVE CONTAMINTD CLOTHING & SHOES. DONT
REUSE TILL CLEANED. IF PERSISTENT IRRIT OCCURS, GET MED AID.
INHALE: REMOV E TO FRESH AIR. GIVE OXYGEN IF BREATHING DIFFICULT,
ARTIFICIAL RESPIRATION IF NOT BREATHING. GET MED AID. INGEST: GET
MED AID. NOTHING BY MOUTH TO UNCONSCIOUS. INDUCE VOMIT-IPECAC:1 OZ
THEN 8 OZ WATER

Flash Point Method:SCC
Flash Point:60.0F,15.6C
Lower Limits:1.4
Upper Limits:19.0
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, FOAM
Fire Fighting Procedures:EVACUATE HAZARD AREA. WEAR PROTECTIVE CLOTHES
INCLUDING NIOSH SCBA. COOL FIRE EXPOSED CONTAINER W/WATER. AVOID
SPREADING BURNING LIQUID W/WATER USED FOR COOLING
Unusual Fire/Explosion Hazard:THIS MATERIAL IS FLAMMABLE AND MAY BE
IGNITED BY HEAT, SPARKS, FALME OR STATIC ELECTRICITY.

Spill Release Procedures:STAY UPWIND AND AWAY FROM SPILL. KEEP ALL
SOURCES OF IGNITION & HOT METAL SURFACES AWAY FROM SPILL. IF SPILL
IS INDOORS, VENT AREA. IF LARGE SPILL, CALL SPILL ERSPONSE TEAM.
NOTIFY APPROPRIATE STATE A ND LOCAL AGENCIES.

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, & OPEN
FLAME. KEEP CONTAINER CLOSED. STORE AWAY FROM STRONG OXIDIZERS IN
COOL, DRY PLACE WITH EXPLOSION PROOF VENTILATION
Other Precautions:GROUND EQUIPMENT TO PREVENT ACCUMULATION OF STATIC
CHARGE. IF POURING OR TRANSFERRING MATERIALS GROUND & BOND
CONTAINERS. DO NOT WELD, HEAT OR DRILL NEAR/ON CONTAINER, EVEN
EMPTIED CONTAINERS CAN CONT AIN EXPLOSIVE VAPORS.

Respiratory Protection:DEPENDING ON THE NATURE & CONCENTRATION OF
AIRBORNE MATERIAL, USE RESPIRATOR OR GAS MASK WITH APPROPRIATE
CARTRIDGES AND CANNISTERS (NIOSH APPROVED, IF AVAILABLE) OR
SUPPLIED AIR EQUIPMENT.
Ventilation:USE EXPLOSION PROOF VENT TO CONTROL VAPOR CONCENTRATIONS.
ADDED VENT/EXHAUST TO MAINTAIN BELOW TLV.
Protective Gloves:WEAR IMPERVIOUS GLOVES.
Eye Protection:WEAR CHEMCIAL RESISTANT GOGGLES.
Other Protective Equipment:WEAR PROTECTIVE CLOTHING AS REQUIRED TO
PREVENT SKIN CONTACT.
Work Hygienic Practices:WASH WITH SOAP & WATER BEFORE EATING, DRINKING,
SMOKING, OR USING TOILET. WASH CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health

HCC:F2
Boiling Pt:B.P. Text:165 TO 244F
Vapor Density:> AIR
Spec Gravity:7.5 LBS/GAL
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Percent Volatiles by Volume:89.6

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH ALKALIES, AQUEOUS ACIDS, AMINES, AND ACIDIC
ALCOHOLS. AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID HEAT, SPARKS, AND OPEN FLAME.
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN THE PRESENCE
OF AIR MAY YIELD CARBON MONOXIDE, AND/OR CARBON DIOXIDE.
Conditions to Avoid Polymerization:AVOID HEAT, SPARKS, AND OPEN FLAME.

Waste Disposal Methods:DISPOSE OF PRODUCT IN ACCORDANCE WITH LOCAL,
STATE, AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.